Dimensions – in carrying case

W x H x D / weight 120 x 130 x 33 mm / 70 g

Dimensions – earphones W x H x D / weight

Earbud: 22.2 x 26.3 x 47 mm
Remote control/charger: 8 x 7.2 x 43.9 mm
Earphone cable length: 520 mm
(From earpiece strain relief to strain relief)
Earphone weight: 21 g
(Medium size silicone ear tips + ear fins included)

Dimensions – charger W x H x D / weight

Snap-on charger: 10.9 x 12.8 x 43.8 mm
Charging cable length: 1200 mm
Charging cable weight: 13 g

Designer

Bang & Olufsen and Jacob Wagner

Type

Wireless in-ear

Materials

Aluminum, Textile, Rubber, Thermoplastic

Colours

Black, Sand, Motion White, Motion Graphite

Microphone

MEMS, Omni-directional
Sensitivity: -42 +/-3 dB dBV/Pa (94 dB SPL @ 1kHz)

Battery

Rechargeable Lithium-Ion battery
- Capacity 110 to 120mAh typically (approx. 55 mAh per side)
- Up to 5 hours playing time at moderate volume level
- 4 hours streamed at 1mW with 1 kHz with Bluetooth

Charging time

2 hours from empty to full charge (approximately)
20 minutes charge gives 1 hour playing time

Charger

Mechanical snap-on
5V DC / 250 mA - recommended minimum charger size

Loudspeaker drivers

Electro-dynamic,
Diameter = 6.4 mm

Frequency range

20 Hz - 20,000 Hz

Impedance

16 Ohm

Sensitivity

113dB SPL +/-3dB, -3dbFS @ 1 kHz
Note: Bluetooth mode 1 mW at 1 kHz

Buttons

3 buttons, multi-functional remote control (volume up/down, connect, mute, step forward/backward, call control, voice activation, switch on/off)

LED

Earphone (multi-colour LED on left earphone):  white (power),  flashing blue (pairing), white (Bluetooth connected), flashing red (reset/battery low)

Features

Wireless bluetooth audio streaming earphone.
Beoplay/Bang & Olufsen app support with ToneTouch and Over-The-Air software update.
Improved and optimized design to fit user in active use, with more options for personalized fit (ear fins, buds and foams)
Supports battery charge while in use (USB-A connection)
Bluetooth audio streaming
Dust protected and water spray proof (IP54)
Microphone with cVc noise cancellation technology

Bluetooth connection

Bluetooth 4.2
10 m operating range - direct line with no obstructions
Remembers the last eight paired devices (connects to one)
AAC codec
aptX LL codec (Beoplay E6 Motion)

Conformance Part:
Audio/Video Control Transport Protocol (AVCTP) v1.4
Audio/Video Distribution Transport Protocol (AVDTP) v1.3
Generic Audio/Video Distribution Profile (GAVDP) v1.3
RFCOMM, v1.2
 
Application Layer/ Interoperability Test:
Advanced Audio Distribution Profile (A2DP) v1.3
Audio/Video Remote Control Profile (AVRCP) v1.6
Hands-Free Profile (HFP) v1.6
Headset Profile (HSP) v1.2
 
Supported LE Profiles:
Battery Service (BAS)
Device Information Service (DIS)

Support

Battery level information on paired device (device dependent)
Multi-point

In the box

Beoplay E6
Silicone ear gels / ear tips
Silicone gel sleeves / ear fins
Snap-on charging cable
Cable flips
Quick start guide

Available accessories

A set of silicone ear gels; black, sand
A set of silicone gel sleeves; black, sand, motion white, motion graphite
Charging dongle; black, sand, motion white, motion graphite
Silicone eartips; orange translucent, mint translucent
Cable clips

Cord

0.52 m textile cable between headphones
1.2 m charging/data USB-A to on-cable connection

Supported products

Compatible with Bluetooth versions
1.1, 1.2, 2.0, 2.1, 3.0, 4.0, 4.1 and 4.2