The Beoplay E8 2.0 is an upgrade of the bestseller BeoplayE8. It's a 100% wireless headset with an improved wireless charging cradle.
The Beoplay E8 2.0 has a perfect fit for the ear and spoils you with Bang& Olufsen Signature Sound. The intuitive touch interface gives you control over music, calls and voice commands.
The E8 2.0 comes in a Qi-certified charging cradle. This is beautifully crafted from genuine leather, with an aluminum inlay. So you can charge your headphones stylishly on the go. With a playback time of up to 16 hours, you can take the Beoplay E8 2.0 with you wherever you go. In Transparency mode, you can switch the ambient sounds back on with a simple hand movement - choose between four transparency levels in the Beoplay App.
Beoplay E8 2.0
5 STAR - Our Approved Used Bang & Olufsen 5* products are "As New".
Brand New Boxed
Designer Jakob Wagner Type Bluetooth connected true wireless in-ear earphones Noise reduction Passive noise reduction (most efficient with COMPLY™ Isolation ear-tips series 200) Materials Aluminium, textile, polymer, silicone, leather Colours Black, Natural, Limestone, Indigo Blue, Motion White, Motion Graphite
Limited editions: see SS/AW table above
Microphone MEMS, omni-directional Battery Earphones:
Rechargeable lithium-ion battery
- Capacity right (Master): 85 mAh
- Capacity left: 60 mAh
- Up to *4 hours playing time at moderate volume
- Capacity 800 mAh
- Three charges of earbuds (+ one charge in earbuds)
Charging time Earbuds 1½ hours for full charge in charging case
USB-C: 2 hours for both earbuds and charge unit
Wireless (Qi): 2½ hours to fully charge incl. earbuds
Charge unit 5V DC / 750 mA USB-C or Qi charged Charging pad
Aluminium, leather, silicone
Wireless charger, Qi-certified (type 6462 from April 2019). USB-C connection
- Compatibility to all Qi-enabled devices including but not limited to iPhone XS Max, XS, XR, X, 8 Plus, 8, Samsung S9 Plus, S9, S8
- Supports fast charging. Certified EPP (Up to 10W)**
- Apple: 7.5W
- Android: 10W
<5W Qi output from 5V/1A adapter
5W Qi output from 5V/2A, 3A, 4A adapter
10W Qi output from 9V/1.67A, 9V/1.8A, 12V/1.1A, 1.5A, 3A adapter
Loudspeaker Electro-dynamic, 5.7 mm diameter Frequency range 20 Hz - 20,000 Hz Impedance 16 Ohm Sensitivity 107 dB +/- 3 dB 1kHz @ -3 dBFS (Max volume) with Bluetooth playback SAR Max. power < 4 dBm Buttons and LED 1 multi-function button touch control on each earbud
(volume up, volume down, connect / mute / step forward/backward / call control/voice activation)
Factory reset: hold both L and R touch field 10 sec. until red LED flashes.
Earphones (multi-colour LED): white (power), blue flashing (Bluetooth pairing), white (Bluetooth connected), red flashing
Charging case (multi-colour LED on top): orange (charging), green (fully charged)
Charging case (white LED near USB-C during charging): one white LED for one charge available; two LEDs for two charges and three LEDs for three charges available.
A fourth charge on the inserted E8's allows up to four times four hours playtime; up to 16 hours playtime* between charging the case.
We recommend charging the case every 14 days - when not in use.
Features - Bluetooth streaming to right earbud (master) and NFMI carries sound from right to left earbud.
- Magnetic activated shut-down when docked in charging unit. The right earbud shuts down automatically after no music has been streamed for 15 minutes via Bluetooth audio channel.
- Multipoint connection (connect to two devices at the same time)
- Bang & Olufsen app support
- Over-The-Air software update via BLE (Bang & Olufsen app)
- Apple Watch interface
- Dust-protected and splash-proof (IP54 level)
- CvC microphone noise reduction technology
- Qi charged (via Qi charging case)
Bluetooth Bluetooth 4.2 (CSR ADK 4.1)
10 m operating range
Remembers the last eight paired devices (connects to two)
EDR (2EV3, 2EV5),
SCO (HV1, HV2, HV3),
eSCO (EV3, EV4, EV5)
Secure pairing mode
Audio/Video Control Transport Protocol (AVCTP) v1.4
Audio/Video Distribution Transport Protocol (AVDTP) v1.3
Generic Audio/Video Distribution Profile (GAVDP) v1.3
Application layer/ inter-operability test:
Advanced Audio Distribution Profile (A2DP) v1.3
Audio/Video Remote Control Profile (AVRCP) v1.6
Hands-Free Profile (HFP) v1.6
Headset Profile (HSP) v1.2
Supported LE profiles:
Battery Service (BAS)
Device Information Service (DIS)
Support Battery level information via the Bang & Olufsen app Included accessories Charging case with wireless Qi receiver v1.2
Earbud left (NFMI) and right (Bluetooth master)
USB-A/USB-C cable for charging, 1,2m
COMPLY™ Sport 200 tips, Medium size
Silicone tips, 4 sizes
Quick start guide
Available accessories A set of silicone ear gels, Black, Sand or Pink, type 1411
Silicone eartips; Orange translucent, Mint Translucent, type 6468
Silicone ear fins; Motion White, Motion Graphite, type 6469
Bang & Olufsen app (Apple Store and Google Market)
COMPLY™ 200 series earbud/tips (recommended) via local retailers or e-com or www.complyfoam.com
In all released colours:
Earbud, left or right, type 387 (from April 11th 2019)
Charging case, type 370 (from April 11th 2019)
Beoplay charging pad, type 6462 (from April 18th 2019)
Long USB cable 1.25m (USB-A to USB-C), type 9749
Four sets of silicone ear tips, sizes XS, S, M, L.
Bluetooth supported products Compatible with Bluetooth enabled devices of version 1.1, 1.2, 2.0, 2.1, 3.0, 4.0, 4.1 and 4.2
Free UK Shipping
Free collection from store available
Please contact us for International shipping